Car wiper switch using graphical method

When the car wiper switch is used, it mainly depends on the brand of the car, and there will be some differences in the location and use of the logo of different brands. Under normal circumstances, the wiper lever and the lamp lever are printed with a lot of functional signs, which can be dialed to the appropriate position according to the specific use. There are also some adjusting mechanisms that belong to the knob type, and the use method is much the same.

1, generally when the wiper is turned on, the upward control handle is to the MIST position, and the wiper will scrape once.

2, when the wiper is turned off, the main thing is to turn off the OFFA letter.

3, by turning the adjustment button, generally to the AUTO position, the wiper will control the sensitivity of the wiper through the rain sensor, update the frequency of wiper, such as when the rain is relatively large frequency will increase, when the rain is small frequency will be reduced accordingly.

4, the general low-speed scraping should adjust the lever to the LOW position, if it is high-speed scraping, you need to adjust the position to the HI position.

5, generally in the direction of the driver gently pull the control handle, you can open the glass water switch, the wiper will also work at the same time.